Easy How to Make Rapid Fire

Use this chart for hex values. (Quicker Searches, less than 3 searches and under 7 seconds should get you the address)
-------------
Thompson Ammo [False Rapid] (20/120) = 00140078
Bar Ammo [False Rapid] (20/60) = 0014003C
M1 Garand Ammo [True Rapid] (8/56) = 00080038
Enfield Rifle Ammo [Keep Pressing R] (5/25) = 00050019
MP40 Ammo [False Rapid] (32/96) = 00200060
STG44 Ammo [False Rapid] (30/60) = 001E003C
Karabiner Ammo [True Rapid] (5/60) = 0005003C
Gweher Ammo [Keep Pressing R] = 000A0014
Shotgun Ammo [True Rapid] (8/24) = 00080018
Pistol Ammo [Keep Pressing R] (7/63) = 0007003F
RPG Ammo [Keep Pressing R] (1/2) = 00010002
Grenade Ammo [False Rapid] = 00010003
------------
Once you get the address, press SELECT and choose "Copy Address".

Now there are several different ways you can do this.

1. Memory Browser Standard 16 Bytes View
Press select in the browser and choose "Paste Address".
Scroll up 9 full lines and you should see the numbers
08003200 in the far right hand side.

XXXXXXXXXXXXXXXXXXXXXXXX08003200

Change them to all zeros. Or the 32 Alone.

2. Memory Browser 8 Bytes View
Goto [PRX] and change "Bytes Per Line" to 8.
You now have CM's memory viewer.
Paste the address into there.
Scroll to the Sixth Column.

Example;
[CHEATER][SEARCH][PRX][MEMORY][DECODER]
00 01 02 03 04 05 06 07
xx xx xx xx xx xx xx xx

Scroll up until you land on a byte value of "32"
Change that "32" into "00".

3. Decoder
Paste the address into the decoder.
The pasted address will always be on the top line so start from there.

Scroll up exactly 33 lines. Not really far. It will always be 2 lines above a 3F800000. You should see 00320008 or you should scroll up until you see it.

------------------

And then fire your gun and see if it works.

Sometimes it will not be 00320008, sometimes it will be 00320001 or 02 or 03, just know that IT WILL ALWAYS BE IN THE SAME PLACE. Just nop the line. The Karabiner and the M1 Garand does not use 00320008 but the rapid fire for it, is still in the same place, 33 lines up in the Decoder.


*To nop a value, just set the value to 0x00000000

well this should go into the psp hacking guide sections
alon with the rest of the guides in section

ok will change them